Certificate on ECE R124 000756
Annex 4 to Test report Nr. 55807714 (1st release)
Test object Wheel for passenger cars 6,0J x 15EH2+ Type 702
Manufacturer MOMO Srl
Page 1 of 2
Test object
Version Wheel Marking / Center-ring Number of holes / Offset Whee Rolling
PCD- (mm)/ (mm) l load circumferenc
Center hole-ø (kg) e (mm)
(mm)
D5 702-D5 4/100/56,6 43 505 1894
Fixing element
Nr. Type of fixing element Seat Fixing torque (Nm) Shaft length (mm)
S01 Original equipment screw Conical 60° 100 22
M12x1,25
Application
Trade name kW-range Tire Tire-related conditions and notes Conditions
Vehicle type and notes
Approval number
Fiat Punto 48-99 185/65R15 A33 ECE A14 A18 Flh
199 S01
e3*2001/116*0217*..,
e3*2001/116*0286*..,
e3*2007/46*0009*..,
e3*2007/46*0010*..
- Grande / Evo
General information
The minimum required speed ranges (with the exception of the M + S profiles) and carrying capacities
to be used for tires are reported in the vehicle documents (vehicle registration certificate).
Furthermore, only one tire type on the same axle is permitted. When using different types of tires on
front and rear axle, it should be according to the notes of the vehicle and / or tire manufacturer's
instructions.
The suspension and brake components shall comply with the exception of retrofit measures applied in
the appropriate edition, as original equipment. The admissibility of further changes must be assessed
separately.
The standard spare wheel must not be used for longer distance than necessary, always at moderate
speed and using the standard equipment. On vehicles with all-wheel drive, only one spare tire with the
same size and the same rolling circumference of original tire size may be used.
The users of the wheels must be informed that the tire pressure prescribed by the tire manufacturer
must be observed.
Special conditions and notes
A14 Only adhesive weights may be affixed to the exterior of the rim below the bead seat for
balancing the special wheels.
TUV Rheinland Italia – Via Mattei, 3 – 20010 Pogliano Milanese (MI)
Certificate on ECE R124 000756
Annex 4 to Test report Nr. 55807714 (1st release)
Test object Wheel for passenger cars 6,0J x 15EH2+ Type 702
Manufacturer MOMO Srl
Page 2 of 2
A18 Only tubeless tyres and metal screw-on valves mounted from outside and in broad conformity
with the DIN, E.T.R.T.O or "Tire and Rim" standard are permissible.
A33 Only fine-linked snow chains, which come to an overall thickness of not more than 12 mm
(including chain joint), may be used at the front axle.
ECE The use of this wheel / tire combination is permissible only if these tires are already registered
as standard equipment in the vehicle documents or released by the vehicle manufacturer, see extract
from the EC type-approval of the vehicle (EC certificate of conformity). The load index, speed symbol,
the M + S designation, the tire manufacturer and the advices/recommendations reported in
documentation of the vehicle manufacturer must be respected when using this tire size
Flh The wheel/tyre combination is permissible for hatchback vehicle models, both with 3 and 5
doors.
S01 For fastening the special wheels only original equipment fixing element no. S01 (see page 1)
can be used.
00222025.DOC
TUV Rheinland Italia – Via Mattei, 3 – 20010 Pogliano Milanese (MI)
